Cudy FS1010P 8-Port PoE+ Fast Ethernet Switch
Cudy FS1010P 8-Port PoE+ Fast Ethernet Switch
Is the FS1010P right for your installation?
Choose the FS1010P when 10/100 Mbps connections meet your devices’ bandwidth requirements and you need up to eight compatible PoE devices powered from one switch. It provides a shared 115 W PoE budget, with up to 30 W per PoE port. The total connected load must stay within 115 W.
Need Gigabit speeds? Consider the Cudy GS1010P instead: it provides Gigabit PoE ports and Gigabit uplinks, with a shared 100 W PoE budget. The FS1010P’s two uplinks are Fast Ethernet, not Gigabit.
For extended cable runs, the FS1010P supports up to 250 m on ports 1–8 in Extend mode, at a reduced speed of 10 Mbps.
The Cudy FS1010P is a 10-port Fast Ethernet PoE+ switch designed to simplify power and data delivery for commercial networks and building infrastructure. Eight IEEE 802.3af/at PoE ports support compatible powered devices, while two dedicated Fast Ethernet uplink ports connect the switch to the wider network.
Key Features
- 8 × 10/100 Mbps PoE+ RJ45 ports for power and data
- 2 × 10/100 Mbps Fast Ethernet uplink ports
- IEEE 802.3af/at PoE support with up to 30 W per port
- 115 W available PoE budget with intelligent power management
- Extend mode supports transmission up to 250 m at 10 Mbps on ports 1–8
- VLAN mode isolates PoE client ports to improve network security
- PoE watchdog can restart inactive connected devices automatically
- Silent metal enclosure for desktop or wall-mounted installation
Benefits
- Combines network connectivity and power over one Ethernet cable
- Reduces the need for separate power outlets near connected equipment
- Supports longer cable runs where standard 100 m Ethernet reach is insufficient
- Improves service continuity by monitoring and recovering unresponsive PoE devices
- Provides a practical central power and connectivity point for small commercial installations
Technical Specifications
| Manufacturer | Cudy |
| Model | FS1010P |
| Softcore Group Industrial Solutions SKU | CD-FS1010P |
| Ethernet interfaces | 10 × 10/100 Mbps RJ45 |
| PoE ports | Ports 1–8 |
| Uplink ports | 2 × 10/100 Mbps RJ45 |
| PoE standards | IEEE 802.3af/at, Mode A |
| Maximum power per PoE port | 30 W |
| Available PoE budget | 115 W |
| Power supply rating | 120 W internal AC power supply |
| Power input | 100–240 V AC, 50/60 Hz |
| Switching capacity | 2 Gbps |
| Forwarding rate | 1.488 Mpps |
| MAC address table | 2,048 entries |
| Modes | Default, VLAN, Extend and PoE Watchdog |
| Standard transmission distance | Up to 100 m, cable dependent |
| Extended transmission distance | Up to 250 m at 10 Mbps on ports 1–8 in Extend mode |
| Operating temperature | 0 °C to 40 °C |
| Dimensions | 200 × 118 × 44 mm |
| Enclosure | Metal |
| Installation | Desktop or wall mount |
Typical Applications
- Commercial network backbones
- Wireless access point deployments
- VoIP and IP communications infrastructure
- Smart-building networks
- Small office and branch network installations
- Remote PoE devices requiring extended cable reach
What’s Included
- 1 × Cudy FS1010P PoE+ switch
- 1 × AC power cord
- 1 × Installation guide
Recommended Related Products
- Cat5e or Cat6 Ethernet cable
- RJ45 connectors and patch leads
- Network cabinets and cable-management accessories
- Compatible PoE access points, phones or control devices
- Surge protection and backup-power equipment
Important: The 250 m transmission range is available only when Extend mode is enabled and operates at 10 Mbps. Confirm the combined power requirement of all connected PoE devices does not exceed the switch’s available PoE budget.
Technical Resources
Browse our Technical Resources & Manuals page for manufacturer datasheets, manuals and relevant catalogues. If your exact model is not listed, send the product code to request documentation where available.