Cudy GS1016 16-Port Gigabit Unmanaged Network Switch
R 719.00
Skip to product information
Cudy GS1016 16-Port Gigabit Unmanaged Network Switch
R 719.00
The Cudy GS1016 is a 16-port unmanaged Gigabit Ethernet switch for expanding commercial, operational and structured-cabling networks. Its fanless metal enclosure, plug-and-play operation and included mounting hardware make it suitable for desktop or rack-mounted installations.
Key Features
- 16 × 10/100/1000 Mbps Gigabit RJ45 ports
- Unmanaged plug-and-play operation
- Default, VLAN and Extend operating modes
- VLAN mode isolates downlink ports 1–14 from one another
- Extend mode supports up to 250 m at 10 Mbps on ports 1–14
- IGMP snooping for more efficient multicast traffic handling
- Loop detection and prevention
- DSCP and IEEE 802.1p traffic prioritisation
- Fanless metal enclosure for quiet operation
- Desktop or rack-mounted installation
Benefits
- Adds sixteen Gigabit connections without complex configuration
- Supports network segmentation for connected client devices
- Enables longer cable runs where standard Ethernet reach is insufficient
- Helps prevent network disruption caused by accidental loops
- Fits offices, equipment rooms and commercial network cabinets
Technical Specifications
| Manufacturer | Cudy |
| Model | GS1016 |
| Softcore Group Industrial Solutions SKU | CD-GS1016 |
| Switch type | Unmanaged Gigabit Ethernet switch |
| Ethernet ports | 16 × 10/100/1000 Mbps RJ45 |
| Extend-mode ports | Ports 1–14 |
| VLAN-mode ports | Ports 1–14 |
| Operating modes | Default, VLAN and Extend |
| Switching capacity | 32 Gbps |
| Forwarding rate | 23.808 Mpps |
| MAC address table | 8,192 entries |
| Jumbo frame | Up to 15 KB |
| Packet buffer | 4 Mbit |
| Network standards | IEEE 802.3i, 802.3u, 802.3ab and 802.3x |
| Standard copper reach | Up to 100 m, cable and speed dependent |
| Extended reach | Up to 250 m at 10 Mbps on ports 1–14 |
| Power input | 90–260 V AC, 50/60 Hz |
| Operating temperature | 0 °C to 40 °C |
| Dimensions | 200 × 118 × 44 mm |
| Approximate weight | 0.62 kg; revision dependent |
| Enclosure | Metal, fanless |
| Installation | Desktop or rack mount |
Typical Applications
- Office and branch networks
- Structured-cabling installations
- Commercial network backbones
- Wireless access-point aggregation
- Equipment rooms and network cabinets
- Retail, warehouse and municipal facilities
What’s Included
- 1 × Cudy GS1016 Gigabit switch
- 1 × AC power cord
- 1 × Rack-mounting kit
- 1 × Installation guide
Recommended Related Products
- Cat5e or Cat6 Ethernet cable
- RJ45 patch leads and connectors
- Network cabinets and rack accessories
- Patch panels and cable-management accessories
- UPS and surge-protection equipment
Important: This is an unmanaged, non-PoE switch. Extend mode applies to ports 1–14 and limits those ports to 10 Mbps. Physical specifications may vary slightly by hardware revision.
Technical Resources
Browse our Technical Resources & Manuals page for manufacturer datasheets, manuals and relevant catalogues. If your exact model is not listed, send the product code to request documentation where available.