Cudy GS1010P 8-Port Gigabit PoE+ Switch
Cudy GS1010P 8-Port Gigabit PoE+ Switch
Is the GS1010P right for your installation?
Choose the GS1010P when your compatible PoE devices or network uplinks need Gigabit connectivity. It provides eight 10/100/1000 Mbps PoE+ ports and two Gigabit uplinks, with a shared 100 W PoE budget and up to 30 W per PoE port. The total connected load must stay within 100 W.
If 10/100 Mbps connections meet your requirements, consider the Cudy FS1010P instead. It provides Fast Ethernet PoE ports and uplinks with a shared 115 W PoE budget. Choose based on both bandwidth and the combined power requirements of your devices.
For extended cable runs, the GS1010P supports up to 250 m on ports 7–8 in Extend mode, at a reduced speed of 10 Mbps. Extended reach does not retain Gigabit speed.
The Cudy GS1010P is a 10-port Gigabit PoE+ switch for commercial networks, building systems and high-bandwidth PoE deployments. It provides eight Gigabit PoE ports and two dedicated Gigabit uplinks, allowing compatible devices to receive power and data through a single Ethernet cable.
Key Features
- 8 × 10/100/1000 Mbps PoE+ RJ45 ports
- 2 × dedicated Gigabit RJ45 uplink ports
- IEEE 802.3af/at PoE with up to 30 W per port
- 100 W available PoE budget with intelligent power management
- VLAN mode for isolation of ports 1–8
- Extend mode supports up to 250 m at 10 Mbps on ports 7–8
- PoE watchdog monitors and restarts inactive connected devices
- Silent metal enclosure with desktop, wall or rack-mount options
Benefits
- Delivers Gigabit network performance to connected PoE devices
- Reduces cabling and local power requirements
- Supports long-distance endpoints where standard Ethernet reach is insufficient
- Improves network resilience through automatic PoE device recovery
- Provides flexible installation for offices, network rooms and building systems
Technical Specifications
| Manufacturer | Cudy |
| Model | GS1010P |
| Softcore Group Industrial Solutions SKU | CD-GS1010P |
| Ethernet interfaces | 10 × 10/100/1000 Mbps RJ45 |
| PoE ports | Ports 1–8 |
| Uplink ports | 2 × Gigabit RJ45 |
| PoE standards | IEEE 802.3af/at, Mode A |
| Maximum per PoE port | 30 W |
| Available PoE budget | 100 W |
| Power supply | 120 W internal AC supply |
| Power input | 100–240 V AC |
| Switching capacity | 20 Gbps |
| Forwarding rate | 14.88 Mpps |
| MAC address table | 2,048 entries |
| Modes | Default, VLAN, Extend and PoE Watchdog |
| Extended reach | Up to 250 m at 10 Mbps on ports 7–8 |
| Operating temperature | 0 °C to 40 °C |
| Dimensions | 220 × 150 × 44 mm |
| Weight | Approximately 1 kg |
| Installation | Desktop, wall or rack mount |
Typical Applications
- Commercial network backbones
- Wireless access point deployments
- VoIP and IP communications
- Smart-building and operational networks
- Branch offices and small network rooms
- Long-reach PoE endpoints
What’s Included
- 1 × Cudy GS1010P Gigabit PoE+ switch
- 1 × AC power cord
- 1 × Installation guide
Recommended Related Products
- Cat5e or Cat6 Ethernet cable
- RJ45 patch leads and connectors
- Network cabinets and cable-management accessories
- Compatible PoE devices
- Surge protection and backup-power equipment
Important: Extend mode limits the applicable ports to 10 Mbps. Confirm the total load of all connected devices remains within the available 100 W PoE budget.
Technical Resources
Browse our Technical Resources & Manuals page for manufacturer datasheets, manuals and relevant catalogues. If your exact model is not listed, send the product code to request documentation where available.